|
Post by anthrax76 on Jul 28, 2020 23:00:40 GMT 8
nope nope, 'di pwede i weld.
and ang RD hanger is supposed to be Alu. search sa interwebz ng horizontal dropout rd hanger. most of it works for 9mm QR which is meron ka na. bakit kailangan TA? mas mahal ang hubs nun, magpapalit ka pa eh mukhang okey na naman ang setup mo ng rear.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 29, 2020 11:20:05 GMT 8
Edi ganitong set up nalang po kung dehins nako mag thru axle?
|
|
|
Post by anthrax76 on Jul 29, 2020 12:30:35 GMT 8
pwede naman. ang tanong ko kasi, bakit gusto mo ng TA? the way na gagamitin yung bike, i don't think may mechanical advantage ang TA unless pala you stick with 7 speed and below, pwede yung ganitong RD. Iniipit nung bolts yung hanger. check mo muna sa bike mo kung ilan ang width na kasya. baka kapag ng 8 speed and up eh kailangan ibuka, risk yun na dehins dumiretso ang pagkakabuka at laging tabingi ang chainline.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 30, 2020 14:27:00 GMT 8
Sa tingin ko po oo may advantage po sakin yung TA yata, kasi sa TA may harang na po literal yung buong dropout diba ? Yung length po ng dropoit ko ay 10*135mm, kapag TA po 12*142mm? Naka speedone soldier po ako na hub eh, Bali since steel frame naman po yung frame expand ko nalang po uli yung dropout para kasya po yung axle, sa front pwede ko rin expand kaso bibili napoako ng fork na disc brake compatible.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 30, 2020 14:33:47 GMT 8
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 30, 2020 14:44:21 GMT 8
Unstable po ang QR sa track dropout eh, ni research ko rin po sa google. Dati yung bolt type pa po yan dehins ko kailangan ng dalawang chain tensioner, kaso since ang QR dehins pwede literal na sikipan mababali po na bailan napo ako eh ahhaha, ang TA QR rin naman po kaso gaya nga po ng sabi ko buo nakasi yung dropout nya ng TA eh kaya nagagandahan po ako, 2nd dehins napo pantay wheelset look closely yung chain tensioners left tyaka right, at ang dami po nakakabit din kasi eh kaya parang maganda po yung thru axle at TA na hangar since may lalagyan ng RD sa baba
|
|
|
Post by anthrax76 on Jul 30, 2020 17:17:31 GMT 8
actually yung hanger na pinakita mo is pang QR din naman, hehe.
yung BMX ng mga anak ko horizontal dropout, wala naman problem on wheel alignment. ako naman, na diagonal dropout sa mtb, naka 9mm QR, wala rin problem sa alignment. anyway, still your call, hehe. sa akin kasi, wala naman papansin sa bike habang tumatakbo na, hehe.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 31, 2020 11:00:36 GMT 8
Kapag quick release lang po kasi at no chain tensioner both sides na pupush yung wheel ko or nag ru-rub sa kaliwang dropout po eh, but try ko po testing mamaya e center
|
|
|
Post by anthrax76 on Aug 3, 2020 11:20:52 GMT 8
sabagay, horizontal dropout kasi yung frame. pero yun nga, pwede naman yung current setup mo na may...ano ba tawag dyan...tug nut?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 7, 2020 20:20:22 GMT 8
chain tensioner? Yes po needed na sa dropout since naka QR na eh.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 8, 2020 10:49:01 GMT 8
I think ganitong set up nalang gagawin ko since yung thru axle hangar ko ay kinda same naman sa pic below cut off ko nalang yung horizontal dropout then s-screw ko yung TA hangar sa frame 🙂
|
|
|
Post by xmayor on Aug 8, 2020 11:49:04 GMT 8
dehins ba sobrang complicated na? and with the modification, baka ma-compromise na yung safety.
hmmmm... getting a second hand frame na TA ready could be a more practical option. then just hang that old frame on your living room wall! 😊
|
|
|
Post by anthrax76 on Aug 10, 2020 14:49:55 GMT 8
ayun, tama nga, tug nut lang kailangan, na meron na ngayon. what you need is a hanger. try mo google, horizontal dropout hanger, marami nang options. no need to modify your frame any further.
|
|