BIKEHEAD
XC Rider
"WHAT COMES UP, MUST GO DOWN"
Posts: 149
|
Post by BIKEHEAD on Jul 27, 2004 14:56:56 GMT 8
could you please give us some info on zsc frames
|
|
|
Post by stormloader on Jul 27, 2004 17:48:18 GMT 8
Bikehead ako din naiintriga sa frame na 'to eh. for a while dami nito sa paulina's, meron din sa extreme. Yung iba mukhang DH materyales fuertes ang dating, meron naman medyo bara-bara lang with crappy shock pa. Cheapest na nakita around 12-14k. Logically, at that price dapat maganda-ganda na 'to. Ano punta na kayo maquiling ng mga tropa mo
|
|
BIKEHEAD
XC Rider
"WHAT COMES UP, MUST GO DOWN"
Posts: 149
|
Post by BIKEHEAD on Jul 28, 2004 9:39:02 GMT 8
nakabili yung kaibigan ko sa cycle mart sa quipo 14k wala pang shock sa bikeshop sa fort 18k may shock na. maganda sya kaya lang wala talaga kaming alam sa zsc. pinaguusapan na namin yung makiling ride kapag nagkaayos ng sked inform kita agad
|
|
|
Post by stormloader on Aug 30, 2004 19:08:12 GMT 8
According to some guy sa paulina's ang ZSC frames daw ay gawa/licensed ng Norco bikes. Not sure kung tutoo yun so take it for what it's worth
|
|
|
Post by mykell9999 on Aug 31, 2004 8:28:41 GMT 8
er....slightly off topic but a friend of mine is selling his zsc fs frame with rockshox sid rear shock and head set for 12k. negotiable pa. 2 months used lang, and never on trails. pm me if interested.
|
|
|
Post by trixxter on Sept 1, 2004 21:00:53 GMT 8
Most ZSC frames I've seen na naka display walang rear shocks and 4 bar linkage type. If it's licensed by NORCO, Is it also made in CANADA?
|
|
|
Post by polpan on Dec 9, 2004 11:45:43 GMT 8
saw one also pero hardtail sya... planning to buy it kaso wala pang masyadong feedback and if its worth for abuse....
|
|
|
Post by minotaur on Aug 19, 2005 19:12:04 GMT 8
Are there any new reviews or comments about this frame? I heard its selling for under 10T(w/o rear shock) in Quiapo nowadays... seriously considering it.
|
|
|
Post by alien_scream on Aug 19, 2005 19:24:04 GMT 8
|
|
|
Post by ztnom13 on Aug 23, 2005 14:22:23 GMT 8
whoa! angas nga ah!
|
|
|
Post by raven on Aug 24, 2005 13:42:55 GMT 8
|
|
|
Post by polpan on Sept 4, 2005 18:10:33 GMT 8
may website ba ang zsc?
|
|
elokahn
Free Rider
Swoosh...
Posts: 347
|
Post by elokahn on Oct 6, 2005 10:19:25 GMT 8
wala clang web site pero made in canada nga ata cya kasi may flag ng canada sa harap eh. i considered getting one but i don't think it's worth the risk.
|
|
|
Post by alien_scream on Oct 6, 2005 11:09:23 GMT 8
ZSC are made in taiwan under licensed from norco!!!!!
|
|
|
Post by Blister T on Oct 9, 2005 3:32:59 GMT 8
the ZSC's in cartimar are actually norco vps' frames... which is also made in taiwan... yes norco is from taiwan but designed in canada.... the only diff with the norco vps and the ZSC sold here are the cable routing and of course the rear shock... kasi minsan walang kasama na shock... may iba namang zsc na iba ang size ng seatpost, may iba rin na iba ang headtube... basically its d same w the vps, geometry and all...
a friend of mine is selling his VPS1. its d only VPS1 in the phils. karamihan dito kasi VPS2. walang VPS1. its white/red and basically new kasi it was replaced by norco when it had a bearing problem (not frame related)... replacement frame was shipped from abroad.
frame comes w burner shock, longer stroke = 7+ inches
18k only
message me if interested
|
|
|
Post by XP on Oct 10, 2005 10:37:41 GMT 8
so far soo good maganda namna ang performance nya ...kakapurchase ko lang ,...binarat ko sya ...nakuha ko for 9k lang.....with shocks... 2nd hand ng lang... sariwa pa....... ...tignan ko ride nya i ride ko sa tagaytay (pk2) baka this week....
|
|