koy8
Lurker
Posts: 7
|
Post by koy8 on Apr 2, 2017 3:48:40 GMT 8
Pahingi naman ako ng advice meron kasing old MTB yung father ko medyo matagal-tagal narin dehins nagagamit yun since na-hospital sya noon. Sabi nya yun nalang gamitin ko instead of buying.
Since medyo malaki yung frame nya nag paplano ako bumili ng bike frame from online sellers. Then nakakita ako ng tingin ko fit sakin kaso I have no idea ano ba dapat ko gawin before buying that frame?
Baka kasi if dalhin ko sa quiapo then sabihin ko, gusto ko swap yung old frame to this new frame, baka magkaproblema ako.
Later I'll post the pictures of my fathers MTB, medyo pinaglumaan narin yung parts but tingin ko good condition pa yun.
|
|
koy8
Lurker
Posts: 7
|
Post by koy8 on Apr 2, 2017 12:18:22 GMT 8
Venzo fx3 frame M 6061 Sr suntour xcr Shimano 8speed altus shifter Shimano deore crank 600m handle bar Maxxis tire 26x2.20 Quando hubs Shimano cogs
|
|
koy8
Lurker
Posts: 7
|
Post by koy8 on Apr 2, 2017 12:26:29 GMT 8
Yung frame na balak ko sana ipang swap jamis ranger sx, not sure kung anong year but it's an old model of jamis.
|
|
|
Post by anthrax76 on Apr 2, 2017 15:28:23 GMT 8
'di ko sure kung pwede outright swap yan sa bike shop. although pwede mo ibenta yung frame. ano ba yung height mo at sukat nung frame?
|
|
koy8
Lurker
Posts: 7
|
Post by koy8 on Apr 2, 2017 16:19:26 GMT 8
5flat-5'1ft height ko sir anthrax
Fx3 Medium size 14.5inch seat tube/seat post length 22 Top tube 22inch
Problema sa MTB ng father ko sagad na nakababa yung saddle para maabot ko yung pedals, kaya balak ko sana bumili ng smaller frame kaso dehins ata basta basta pwede mag swap ng frame even 26er tires rin yung ipang papalit ko.
|
|
|
Post by anthrax76 on Apr 2, 2017 17:03:39 GMT 8
toptube ba yung sinukat mo or ETTL (Effective Top Tube Length)?
ETTL is the horizontal line from the center of the headtube to the center of the seat tube. kung sloping toptube, extend mo siya using the seatpost (seatpost yung kinakabitan ng saddle).
maliit na actually yung frame mo, 14.5 is small. mas mahirap na maghanap ng mas maliit dyan. yung swapping, imagine this, kung ikaw ang may-ari ng bike shop, may pupunta sa 'yo at nakikipagswap ng used frame for a new one, papayag ka?
anyway, kung bibili ka ng bagong frame, may mga papalitan ka rin. ilang beses na rin ako nagpalit ng frame at unless parehong pareho ang ipapalit mo, heto mga papalitan mo.
1) Headset 2) Seatpost 3) Seat clamp 4) FD 5) Chain 6) Fork - lalo kung maigsi ang steerer tube 7) Cable housing 8) Cables
|
|
koy8
Lurker
Posts: 7
|
Post by koy8 on Apr 2, 2017 18:53:50 GMT 8
21inch yung ETTL for venzo fx3
kaya gusto ko palitan yung frame kasi gusto ko abot ko rin yung floor and if imemeasure ko sya based on stand-over height ng venzo fx3 abot ko naman yung floor pero yung balls ko sagad sa top tube hehe, siguro if maliit sakin yung jamis ranger sx (sabi kasi ni seller size 12 yun) adjust ko nalang sa seatpost/saddle yung height.
niresearch ko yung frame measurements ng venzo fx3 and jamis ranger sx (2008 edition ata to), mukhang pasok naman yung ibang measurments sa current parts ng bike.
|
|
|
Post by anthrax76 on Apr 2, 2017 21:07:58 GMT 8
nasanay kasi ako sa frame na horizontal ang toptube. oo sagad sa groin pero dehins naman dumidiin. dehins naman tayo tatambay na toptube eh. kapag tatayo naman normally wala tayo sa bike.
anyway, check mo rin yung jamis kung available.
|
|
|
Post by ice on Apr 17, 2017 9:33:37 GMT 8
based on the photos you posted of your father's mtb, it doesn't look "pinaglumaan" prolly not more than 5 years. with the proper tune-up, this looks sturdy enough for beginners. currahee!
|
|