|
Post by mistergibbs on Jan 7, 2017 12:15:42 GMT 8
Good day po mga kapadyak! Pwede po ba na gumawa ako ng customized na 8speed cog na naka 11-36t para sa mtb ko?
Hg31 11-32t po yung nakalagay sa bike, 8speed altus GS.
Meron dn po na HG31 11-34 Megarange kaso parang bitin parin po yun.
Tipid upgrade lang po ako, wala pa pong budget para mag 9 o 10 speed GS. Yan po sana gagamitin ko sa 711trail2017.
Salamat po!
|
|
|
Post by anthrax76 on Jan 7, 2017 15:20:25 GMT 8
dehins ako maalam sa customization pero may tanong ako.
1) makakalas mo ba yung 32 tooth cog? 2) may mabibili ka bang 36 tooth cog?
kung dehins ang sagot mo to any of the 2 questions, no go. naka 3 ring crankset ka ba?
|
|
|
Post by rgv46 on Jan 7, 2017 15:50:56 GMT 8
Paano mo nasabi na bitin ang 34t? Combine that with a 22 chainring and you could preety much climb anything.imo
|
|
|
Post by anthrax76 on Jan 7, 2017 19:01:21 GMT 8
sa the wall at timberland i used 22 x 32, kaya naman. kahit dehins ka na magtahi nun, now if it is a race, you'd probably want to drive the bike faster with less teeth on the rear.
|
|
|
Post by 18650 on Jan 7, 2017 20:34:48 GMT 8
8spd system using just 7cogs of course this is also possible when using 8 or 9 cogs 12 to 42t yan 36t ang 2nd to the biggest cog. galing sa cs-hg300 cassette. so there's a good chance that your plan will work.
|
|
|
Post by mistergibbs on Jan 11, 2017 15:19:10 GMT 8
Opo mga sir. 3x8 gamit ko, 42/34/24 tapos 8s cog 11-32. 29er po bike ko. Sa pagbabasa ko ng mga nauna na thread training lang talaga sikreto, upgrade na lang din siguro sa deore pag may budget na. Salamat!
|
|
|
Post by mistergibbs on Jan 11, 2017 15:20:11 GMT 8
8spd system using just 7cogs of course this is also possible when using 8 or 9 cogs 12 to 42t yan 36t ang 2nd to the biggest cog. galing sa cs-hg300 cassette. so there's a good chance that your plan will work. Astig to sir! 😊 nka 1x kaya sa harap?
|
|