|
Post by gadgets88 on Feb 1, 2008 7:43:18 GMT 8
I would like to set up a wireless system to serve 3 floors (1 PC at the ground floor and another 1 at the 3rd, no computers at the 2nd floor stock room).
I subscribed to our local provider's DSL (which uses a ZyXEL P-600 series broadband "modem").
What are the pros and cons of using a particular model of wireless router thingy? I have wooden flooring and walling.
Please advice.
Thank you!
|
|
|
Post by BrusKO on Feb 1, 2008 8:28:43 GMT 8
If this ain't spoon-feeding, then I don't know what is: Go to Google> Type in "How to set up a wireless network" (with or without quotes) or "wireless network tips" or "wood walls wireless network tips" or better yet, go to www.ampland.comEnjoy!
|
|
|
Post by gadgets88 on Feb 1, 2008 11:13:39 GMT 8
dear Kuya Bru, Thank you for the link. ;D I'm particularly seeking advice based from local experience, so I know what particular model for my needs. Should I get a Wireless broadband router (ENHWI-G2)? because I'm using DSL? or a Modem-and-Wireless router (ENDLS-A2+W1G)? or an 802.11 Wireless router (ENHWI-N)? or a Wireless AP router 4 ports (LP-8186)? It says here I'm using Miniport PPPoE. Thank you for your advice, Mr. confused at CD-R K
|
|
|
Post by yukon on Feb 1, 2008 12:29:11 GMT 8
Nelson Any router supporting 802.11 a, b and g will do...make sure your laptop or wireless device will support it and make sure to put WEP unless you want your neighbour prying on your free connection This is what you do let your AP run PPPoE and NAT the Public IPs or you may just wanna add or filter connections via MAC address. what am I saying here ... just drop me a line if I can be of more confusion to you ;D Lovingly yours, Yukky --- feeling may alam bokya naman
|
|
leflea
Free Rider
...
Posts: 327
|
Post by leflea on Feb 4, 2008 16:57:20 GMT 8
usually internet providers will lend you a DSL modem. if so, you can get a wireless router and connect it to the modem. the wireless router is actually an access point + router in one device. the modem-wireless-router has a built-in modem, so it's three devices in one. but if the modem is already provided, you won't need the latter.
get A+B+G or B+G to support most client devices. i suggest one access point per floor level as the signal will deteriorate quickly indoors and in between walls. since you only need to connect two computers why not use wires instead?
|
|
|
Post by anthrax76 on Feb 4, 2008 17:10:09 GMT 8
nelson, brad, normally wireless connections have a 30 meter footprint. and it will degrade if your line of site is blocked especially with metal and concrete. note also that some broadband providers can detect if you're using a router. i'm not sure how they do it, i'm not that techy. so might want to configure your router, same as your modem. or....hide your router behind the modem, since you can split/assign your IP addresses from the router. and don't forget what Yukon said, secure your wireless connection. you wouldn't want your neighbor using your DSL would you?
|
|
|
Post by king on Feb 4, 2008 17:30:28 GMT 8
on the subject, any techies here? we need someone to help set up our home network. PM me pls. thanks!
|
|
|
Post by anthrax76 on Feb 4, 2008 18:45:48 GMT 8
@king, i could give it a shot, he he he
|
|
|
Post by yukon on Feb 4, 2008 19:08:41 GMT 8
king, me too. i can set it up for you just SMS me
|
|
|
Post by gadgets88 on Feb 14, 2008 11:08:05 GMT 8
Should I get a Linksys WRT150?
what? which one?
Hide the router behind the "modem"? With what? invisible cloth as in Harry Potter's?
Confuse me further please... ;D
|
|
timotz
All-Mountain Rider
Keep going!! Its not yet your time.
Posts: 187
|
Post by timotz on Mar 13, 2008 18:46:09 GMT 8
-or you just use a linksys wrt54g -connect it behind the modem. -now if your are prone to downloading i suggest you wired that pc to the router coz wireless only has 56mbps -to determine how much your wireless router can cover, you can do a continuous ping using one of your wireless laptop, hmmmm that is if you have a laptop. -to extenbd the range of your wireless you can use a range expander, example is linksys wre54g. it acts like a repeater. you will put that midway the distance of your wireless pc and router. -also if you are using any wireless phone dont put the base near the router, it can cause annoying signal interference. -NOTE: if you already have a wired router there is no need for you to purchase a wireless router, just buy a wireless access point, attach that to your existing wired router and you now have a wireless system. -hmmm hope these info helps
|
|
leflea
Free Rider
...
Posts: 327
|
Post by leflea on Mar 13, 2008 19:28:28 GMT 8
WRT54 is a good model. we have one at the office. it's my personal choice. you can even install 3rd party firmware on this model for additional features, but that'll only complicate things.. anyways, 56mbps, or even oldskul 11mbps b's, are more than enough for internet usage. home internet connections won't usually go beyond 2mbps. it's a different story if you transfer a lot of large files between computers on your local network.
|
|
|
Post by Aaronchicharon on Mar 13, 2008 20:02:27 GMT 8
|
|
|
Post by Kevin on Mar 13, 2008 20:39:58 GMT 8
brad Nelson!
If you are on a budget, those CDR-King wireless routers would do fine for your needs. I suggest getting branded ones if you plan to operate 24/7.
|
|
|
Post by levi on Mar 13, 2008 21:19:05 GMT 8
Can I extend the signal using 2 wrt54g? My first is connected to the modem and my desktop. My neighbor lent me his router so I can extend the range and will reach his house. How do I setup both router?
|
|
|
Post by morphues on Mar 13, 2008 22:07:32 GMT 8
leviIf you're using the built in firmware , NO. Yes (a bit complicated-Pero mas mahirap mag prito ng isda), if you'll flash it and use a custom firmware like DD-WRT then set up the 2nd router to repeater or bridge mode. BTW, here's my setup: (1st floor) Smart brad --> El-cheapo CDR King Wireless router (setup as HOST) Wirelessly Connected (2nd Floor) Linksys WRT54g V.2 (repeater mode) supports both wireless and wired connections.
|
|
|
Post by yukon on Mar 13, 2008 22:37:27 GMT 8
Can I extend the signal using 2 wrt54g? My first is connected to the modem and my desktop. My neighbor lent me his router so I can extend the range and will reach his house. How do I setup both router? yes using a repeater w/c what malls do (like Robinson's Galleria) ... but there's this guy in youtube who used a lil creativity to make out a microwave transmitter LINK just google part 2 by the way, if you're neighbour is hosting the AP all you need to do is receive his WiFi signal. For his signal to reach yours you guys must create a ripple signal from his AP to your WiFi device. (Line of sight sana) or he may take out his AP antenna of the house. Wait, how far is he from your place? That'd be a factor
|
|