Post by king on Feb 19, 2008 18:38:36 GMT 8
www.cyclingnews.com/tech/2008/shows/nahmbs08/?id=results/nahmbs086
650B takes hold
Previous shows have been awash with 29"-wheeled mountain bikes whose lesser-used size format was a natural fit for the hand built industry's niche clientele. Fast forward a couple of years, though, and the old 'in between' 650B wheel format resurrected and championed by Kirk Pacenti looks to be well on its way to supplanting 29ers, at least in this crowd.
Pacenti is a long-time frame builder himself but now primarily dedicates the bulk of his time to Pacenti Cycle Design which he intends to be a 'one stop shop' of products and design services that caters to the specific needs of other builders. As a designer, the ramifications of building frames around 29" wheels weren't lost on him and he introduced his 650B concept at last year's show as a viable alternative.
Arguments about yet another wheel size format aside, the idea does seem to hold merit: 650B neatly splits the difference between the two current frontrunners at a rough outside diameter of about 27.5" and at least in theory, offers up a good compromise between the steamrolling ability of 29" rubber and the lighter weight of 26" hoops. More applicably to Pacenti, though, is the fact that 650B wheels are easier to design a frame around, particularly for riders of smaller stature. Full-suspension makers have also caught on to the fact that 650B forces fewer radial geometry modifications in their designs and Ventana showed off at least two samples at the show.
Even so, Pacenti likely could not have predicted how quickly 650B has been adopted especially given the sometimes painfully uphill struggle that 29" proponents suffered in their early days. Multiple builders had examples on display and the supporting players have quickly stepped up to the plate. Velocity already offers two high-performance 650B rims, SUN ringlé and Stan's NoTubes supposedly have models coming out later this spring, Weinmann might be board as well and Cane Creek has toyed with the idea with a handful of prototypes. On the tire side, IRD/Panaracer is already in production, Kenda has committed to three tire models and Schwalbe and CST are strongly considering tossing their hats into the ring, too.
650B bikes were relatively big at NAHBS (pardon the pun) but it's already become clear to us that the idea isn't strictly limited to the cottage industry. We can't say who it is, but we do know of at least one particularly prominent and well-storied full-suspension maker who has a 650B version in the works.
650B takes hold
Previous shows have been awash with 29"-wheeled mountain bikes whose lesser-used size format was a natural fit for the hand built industry's niche clientele. Fast forward a couple of years, though, and the old 'in between' 650B wheel format resurrected and championed by Kirk Pacenti looks to be well on its way to supplanting 29ers, at least in this crowd.
Pacenti is a long-time frame builder himself but now primarily dedicates the bulk of his time to Pacenti Cycle Design which he intends to be a 'one stop shop' of products and design services that caters to the specific needs of other builders. As a designer, the ramifications of building frames around 29" wheels weren't lost on him and he introduced his 650B concept at last year's show as a viable alternative.
Arguments about yet another wheel size format aside, the idea does seem to hold merit: 650B neatly splits the difference between the two current frontrunners at a rough outside diameter of about 27.5" and at least in theory, offers up a good compromise between the steamrolling ability of 29" rubber and the lighter weight of 26" hoops. More applicably to Pacenti, though, is the fact that 650B wheels are easier to design a frame around, particularly for riders of smaller stature. Full-suspension makers have also caught on to the fact that 650B forces fewer radial geometry modifications in their designs and Ventana showed off at least two samples at the show.
Even so, Pacenti likely could not have predicted how quickly 650B has been adopted especially given the sometimes painfully uphill struggle that 29" proponents suffered in their early days. Multiple builders had examples on display and the supporting players have quickly stepped up to the plate. Velocity already offers two high-performance 650B rims, SUN ringlé and Stan's NoTubes supposedly have models coming out later this spring, Weinmann might be board as well and Cane Creek has toyed with the idea with a handful of prototypes. On the tire side, IRD/Panaracer is already in production, Kenda has committed to three tire models and Schwalbe and CST are strongly considering tossing their hats into the ring, too.
650B bikes were relatively big at NAHBS (pardon the pun) but it's already become clear to us that the idea isn't strictly limited to the cottage industry. We can't say who it is, but we do know of at least one particularly prominent and well-storied full-suspension maker who has a 650B version in the works.